TB 11-5830-263-20-15
a. MCS and Commander's FFCS Cabling Installation (continued, Fig. 4-8)
12. Secure connector P2 of the Highway Cable Assembly (3) to the top Station
connector of the MCS (8).
13. Route the Highway Cable Assembly (3) along the bulkhead wall, as shown in
14. Secure connector P3 of the Slip Ring Cable Assembly (2) to the right-side
Station connector of the Commander's FFCS.
15. Route Slip Ring Cable Assembly (2) along bulkhead wall, as shown in Figure
16. Using the Tie Wraps provided, loosely secure the cabling at the locations
1. Secure connector P2 of Slip Ring Cable Assembly (3) to left-side Station
connector of Driver's FFCS (2).
2. Secure connector P1 of the Highway Cable Assembly (1) to the right-side
Station connector of Driver's FFCS (2).
3 . Route Highway Cable Assembly (1) along bulkhead wall, as shown in Figure 4-
4. Using the Tie Wraps provided, loosely secure the cabling at the locations
22