TM 11-5820-890-10-3
PMCS Continued
RECEIVER-TRANSMITTER SELF-TEST
When
Equipment IS
ITEM
Not Ready/
NO.
B
A
PROCEDURE
Available if:
8
a. Inspect cables with BNC connectors
Insure Connector pin
connector pin is not bent, pushed in or
is pushed in or
broken; ground contacts are not bent or
broken; ground
broken; connector head is not bent
contacts are
bent or broken;
connector
head is bent.
b. Insure complete connector head does not
Connector
turn on cable
head turns on
cable.
c. Inspect cables with 6 pin connectors
Insure Dirty, bent or
that no dirt is inside of connector, pins are
corroded pins.
clean, corrosion-free and not bent
Verify
that spacers have been installed.
d. Insure O ring is present and serviceable.
O ring is miss-
ing or not ser-
viceable.
e. Insure that connector head does not turn on
Connector
cable
head turns on
cable.
5-8