LOCKOUT SET. Loading Lockout Set (local fill). Check the SOI for required lockout set(s).
Set RT FCTN to LD.
Set RT MODE to FH.
Set RT CHAN to MAN or channel 1 thru 6.
Set ECCM fill device select switch to position containing the lockout set.
Set ECCM fill device function switch to ON.
Press H-Ld Display cycles as shown.
Press Sto/ENT Display blinks and shows "Sto L" followed by the first digit of
the lockout numberThe lockout set is now stored in RT permanent memory.
If additional lockout sets are to be loaded, repeat steps a thru j for each.
Set ECCM fill device function switch to OFF.