LOCAL FILLS Continued
Check the SOI for required hopsets.
Set ECCM fill device select switch to position containing the hopset.
Set ECCM fill device function switch to ON.
Press H-Ld Display cycles as shown, and a beep is
Press Sto/ENT Display shows "Sto_".
Enter the number of the channel in which the
hopset is to be stored (1 - 6) Display blinks and
shows "Sto" followed by the channel number in
which the hop- set was stored.
If additional hopsets are to be loaded, repeat
steps a thru j for each.
Set ECCM fill device function switch to OFF.
Disconnect ECCM fill device from RT connector
Set RT switches as needed for normal operation.
Local fills of TRANSEC, lockout, and hopset are now complete.