TM 11-5820-890-30-4
16-17. REPLACEMENT OF REAR COVER ASSEMBLY (15A1).
Tools:
Cross tip screwdriver
Torque screwdriver
ITEM
ACTION
REMARKS
REMOVAL
a. LS-671/VRC
b. Eight screws and flat
washers (2)
c. Flexible cable (4)
Set upside down on work surface
See figure 16-4.
with bottom connector (J1) toward you.
Using cross tip screwdriver, remove and
retain eight screws and flat washers
securing rear cover assembly (1) to
case (3).
Turn rear cover assembly over.
Lift up on outside of flexible cable
connector mounted on LS-671/VRC CCA
and remove flexible cable (4) (shown in
the cutout area of front view) from
LS-671/VRC CCA connector.
d. Rear cover assembly (1)
Remove and discard
cover assembly.
defective rear
Figure 16-4. Loudspeaker-Control Unit LS-671/VRC (Front and Rear Views).
16-25