TM 11-5820-890-30-4
2-47. REPLACEMENT OF FRONT PANEL ASSEMBLY.
Tools:
Cross tip screwdriver
Flat tip screwdriver
Torque screwdriver
Module extractor
Round nose pliers
References:
Paragraph 2-34 for removal and installation of RT top and bottom covers.
Paragraph 2-36 for removal and installation of impedance matching network.
Paragraph 2-38 for removal and installation of ECCM module.
Paragraph 2-39 for removal and installation of control module.
Figures 2-17 and 2-18 for location of components of front panel assembly.
ITEM
ACTION
REMARKS
REMOVAL
a.
b.
c.
d.
e.
f.
g.
h.
i.
HUB cover
HUB
RT top cover
RT bottom cover
Impedance matching network
ECCM module
Control module
Three dust covers
Left bow handle
a.
Right guard
Use flat tip screwdriver. Fully
loosen two captive screws
securing HUB cover to RT.
Remove cover.
Remove.
Remove.
Remove.
Remove.
Remove.
Remove.
Remove from RXMT, AUD/FILL,
and AUD/DATA connectors.
Use cross tip screwdriver.
Remove and retain four screws
securing left bow handle to RT.
Remove and retain left bow
handle.
Use cross tip screwdriver.
Remove and retain four screws
securing right guard to RT.
Remove and retain right guard.
Refer to paragraph 2-34 for
removal of top cover.
Refer to paragraph 2-34 for
removal of bottom cover.
Refer to paragraph 2-36 for
removal of impedance match-
ing network.
Refer to paragraph 2-38 for
removal of ECCM module.
Refer to paragraph 2-39 for
removal of control module.
2-220