4-60. REPLACEMENT OF WIRING ON AUDIO AMPLIFIER CHASSIS CONNECTORS.
Cross tip screwdriver
Flat tip screwdriver
Paragraph 4-52 for removal and installation of 1-Watt Audio Amplifier CCA (5A2).
a. Mounting adapter
Set on work surface with right side
b. Access cover (1)
Remove and retain access cover (1).
See figure 4-14. Refer to
paragraph 4-52 for access
cover removal procedures.
Remove insulation sleeving and tiedown
straps as required. Using soldering kit,
tag, desolder, and remove defective
wire(s) from audio amplifier chassis
connectors J2 through J6 and J9.