TM 11-5820-890-30-4
7-17. REPLACEMENT OF FILTER EMI-CCA. Continued
ITEM
ACTION
REMARKS
INSTALLATION Continued
i.
Screw (19) and Iockwasher
Use cross tip screwdriver. Install and
(18)
hand tighten screw (19) and Iockwasher
(18) securing terminal lug (17) to FILTER
EMl-CCA.
j. Eight screws (5)
Use cross tip screwdriver. Install and
If a screw is not stripped
and Iockwashers (6)
hand tighten eight screws (5) and
but will not tighten, refer
Iockwashers (6) securing access
to paragraph 7-16 for re-
cover (1) to connector case (12).
placement of its threaded
Use torque screwdriver. Torque
screw insert (if present).
screws to 8 to 10 in-lb.
If a tapped hole is defec-
tive, refer to paragraph
7-10 for replacement of
the connector case. (12).
Section V. PREPARATION FOR STORAGE OR SHIPMENT
7-18. GENERAL INFORMATION.
Pack the electrical connector assembly (13A1) in an approved shipping container.
7-22