12-37. REPLACEMENT OF DISPLAY CCA. Continued
c. Display CCA and insulator
d. Display CCA
Display CCA and insulator
Use cross tip screwdriver. Remove and
retain six screws and flat washers secur-
ing insulator plate and display CCA to
Position on standoff posts.
Position. on display CCA.
Use cross tip screwdriver. Install six re-
tained screws and flat washers securing
insulator plate and display CCA to stand-
Refer to paragraph 12-36
for installation of switch
Refer to paragraph 12-34
for installation of front
12-38. REPLACEMENT OF FRONT PANEL.
Cross tip screwdriver
Flat tip screwdriver
Paragraph 12-33 for removal and installation of data entry keypad.
Paragraph 12-34 for removal and installation of front panel assembly.
Paragraph 12-35 for removal and installation of audio flex.
Paragraph 12-36 for removal and installation of switch flex.
Paragraph 12-37 for removal and installation of display CCA.
Figures 12-14, 12-15, and 12-16 for location of components of front panel assembly.