REPLACEMENT OF SEAL SCREW.
Flat tip screwdriver
Power supply adapter
b. Seal screw
d. Rear access cover
(2) and seal screw (1)
Set on work surface with rear toward
you. See figure 13-4.
Use flat tip screwdriver. Remove damaged
seal screw (1) from middle left side
of rear access cover (2) and discard.
Obtain replacement seal screw (1).
Use flat tip screwdriver. Install and
hand tighten replacement seal screw
on rear access cover(2). Use torque
screwdriver. Torque to 15 in-lb.
Figure 13-4. Power Supply Adapter (Rear View) With Rear Access Cover.