TM 11-5830-263-10
3.6.1
CVC HEADSET BATTERY REMOVAL AND REPLACEMENT
NOTE
Using a rechargeable battery containing memory
(for example, Nickel Cadmium, NiCAD) is not
recommended. Memory type batteries should
be fully discharged before recharging. Since the
operational scenario of VIS results in constant
recharging of the battery when the headset is
connected to a FFCS or MOS, using a memory
type battery will result in shorter battery life.
1. Using a flat head screwdriver (if authorized) or a small coin. loosen
two captive screws and remove battery compartment cover. (See
2. Remove battery from compartment.
3. Insert replacement alkaline or rechargeable (Nickel Metal Hydride,
NiMH) battery into the appropriately marked slot in the battery
compartment, observing polarity.
4. Replace battery compartment cover and tighten captive screws until
secure.
POLARITY MARKINGS
LEFT EARCUP
VIEW INSIDE OF BATTERY
COMPARTMENT WITH BATTERY
REMOVED.
BATTERY COMPARTMENT
COVER
CAPTIVE SCREWS
BATTERY SHOWN INSERTED IN
"ALKALINE" SLOT IN BATTERY
COMPARTMENT
Figure 3-3. Details of CVC Battery Compartment
PIN: 075493-901
Change I01
3-4.3/(3-4.4 blank)