TM 11-5820-890-20-1
5.2. COMPONENT REPLACEMENT. Continued
d. Mounting Base (MB):
TO REMOVE:
TO REPLACE:
(1)
Set VAA CB1 to OFF; if used, set LS-671 CB1 to OFF
(1)
Place MB in position on shelf
(2)
Remove RT-A and RT-B (refer to paragraph 5.2.a.)
(2)
Replace bolts (5), IET lockwashers (6), and nuts (8)
securing MB to shelf
(3)
Remove RTA PA (refer to paragraph 5.2.b.)
(3)
Replace all cables on connectors
(4)
Remove VAA (refer to paragraph 5.2.c.)
(4)
Replace VAA (refer to paragraph 5.2.c)
(5)
Remove all cables from connectors
(5)
Replace RT-A PA (refer to paragraph 5.2.b.)
(6)
Remove bolts (5) IET lockwashers (6), and nuts (8)
(6)
Replace RT-A and RT-B (refer to paragraph 5.2.a.)
(7)
Remove MB from shelf
(7)
Set VAA CB1 to ON; if used, set LS-671 CB1 to ON
5-7