16-18. REPLACEMENT OF CASE/FLEXIBLE CABLE ASSEMBLY

16-17. REPLACEMENT OF REAR COVER ASSEMBLY (15A1)

16-18. REPLACEMENT OF CASE/FLEXIBLE CABLE ASSEMBLY. Cont

TM-11-5820-890-30-4 Ground ICOM Radio Sets: Receiver-Transmitter Radio RT-1523(C)/U (NSN 5895-01-234-8093) Manual
Page Navigation
1060

TM 11-5820-890-30-4 16-17. REPLACEMENT OF REAR COVER ASSEMBLY (15A1). Continued ITEM ACTION REMARKS INSTALLATION e. Rear cover assembly (1) Obtain replacement rear cover f. Flexible cable (4) g. Eight screws and flat washers (2) 16-18. Tools: REPLACEMENT assembly. Align and install flexible cable in LS-671/VRC CCA connector and push down on outside of connector to secure flexible cable. Turn rear cover assembly over and aline on case (3). Using cross tip screwdriver, install and hand tighten eight retained screws and flat washers securing rear cover assembly (1) to case (3). Using torque screwdriver, torque screws to 15 in-lb. OF CASE/FLEXIBLE CABLE ASSEMBLY. Cross tip screwdriver Soldering kit Torque screwdriver 1/16-inch allen wrench Expendable Supplies: Solder Cotton swabs Alcohol References: Paragraph 16-17 for removal and installation of the rear cover assembly (15A1). ITEM ACTION REMARKS REMOVAL a. Rear cover assembly (1) Remove and retain rear cover Refer to paragraph 16-17 assembly. for rear cover assembly removal instructions. b. Six screws, flat Using cross tip screwdriver, remove and See figure 16-4. washers (5), and retain six screws and flat washers securing speaker cover (6) speaker cover (6) to case (3). Remove and retain speaker cover. 16-26

Privacy Statement
Press Release
Contact