8-20. REPLACEMENT OF SEAL SCREW. Continued
c. Seal screw (16)
Obtain replacement seal screw.
d. Battery box case (15)
Use torque screwdriver. Install seal screw
in case and torque to 9 in-lb.
8-21. REPLACEMENT OF DAMPENING TAPE GASKET.
a. Two battery box cover
Release two twist lock latches securing
battery box cover (1) to battery box
case (15). See figure 8-3.
b. Battery box cover (1)
Position cover to allow access to
dampening tape gasket (3).
c. Dampening tape
Use pocket knife. Remove and discard
defective dampening tape gasket.
d. Dampening tape
Obtain replacement. Apply adhesive to
back of dampening tape gasket.
e. Battery box cover (1)
Install dampening tape gasket in cover.
Position cover to battery box case (15).
f. Two battery box cover
Fasten two twist lock latches securing
battery box cover to case.