TB 11-5830-263-20-15
MASTER CONTROL STATION (MCS) INSTALLATION
a. Install and secure the MCS to the existing bracket in the sequence(s)
shown in Figure 4-3 using the parts listed in Table 4-1 and the following
tools:
Inch Socket Wrench
Inch Box or Open End Wrench
b. Use existing hardware to fasten other end of ground cable assembly (Item
6) to commander interior light.
c . Place the ASV decal (Item 7), on the curbside cab wall above and to the
left of the MCS where it is clearly visible.
Item
Description
Qty
Part Number
NSN
No.
1
MCS
1
A3205747
5895-01-382-3221
2
Screw, Cap, Hex Head (5/16-18 x 1.250)
4
MS90725-36
3
Washer, Flat (5/16 In)
8
MS27183-12
5310-00-081-4219
4
Washer, Lock, Internal Toothed (5/16 In)
8
MS35333-41
5
Nut, Plain, Hex (5/16-18)
4
MS51967-6
6
Cable Assembly, Ground (2 Ft)
1
A3207044
7
Decal, ASV
1*
A3207041
* See note 4.2c above and Figure 4-8.
