POCKET GUIDE
TM 11-5820-890-10-6
SECTION III PRIMARY OPERATOR/PREPARATION TASKS
PREPARATION TASK 1: Select RT Preparation Settings from MENU
SUBTASKS
ACTION
RESULTS
a. Set RT Volume
(1) Press MENU
Press Menu to display Vol
(2) Press Digit (1-9)
level
for Vol Setting (0) for
Display reads WHSP if 0
Whisper Mode
selected
b. Set RT Channel
(1) Press MENU (until
Display reads (1-6), (Q)
CHAN)
for CUE, (M) for Manual
(2) Press Digit (1-6)
for Channel desired
(0) for MAN 17) for
CUE
c. Set RT Power
(1) Press MENU (until
Display reads (LO, M, HI,
PWR)
PA)
(2) Press CHG for
desired PRW setting
d. Set RT Mode
(1) Press MENU (until
Display reads (SC, FH,
MODE
FHM
(2) Press CHG for
desired MODE
e. Set COMSEC
(1) Press MENU (until
Display reads (PT, CT, TD,
CMSC)
RV)
(2) Press CHG for
desired CMSC setting
f. Set Backlight
(1) Place RT in SQ
Backlight lights (4 settings
ON (2) Press
Low to High, then OFF)
FREQ/Backlight
(3) Press CHG until
desired setting
DEFAULT SETTINGS ARE VOL (5), CHAN (1), PWR (LO), MODE (FH), COMSEC (CT)
9
