POCKET GUIDE
TM 11-5820-890-10-6
PRIMARY TASK 2: Load COMSEC/FH Data/Sync lime Using ANCD*
NOTE: Set RT controls to CT, LD, FH, MAN, and DATA OFF (There
is no requirement to clear a COMSEC alarm.)*****
1) select
6) Set FCTN switch to LD
Soi Radio sUpervisor
on RT []
2) Send Receive Database
7) Do you want to include
sEp Comsec Time
time?**** (Y/N)
3) send to
8) Press [LOAD] on RT
Radio Ancd Stu Pc
4) select: ** iCom Nonicom
9) Transfer in progress/
Abn Rcu Haveq
Transfer successful
5) Connect to RT AUD/FILL
10) RT cannot accept
Connector ***[]
time from ANCD
*The ICOM Fill Procedure loads the radio with COMSEC keys, FH
data, and sync time for all six SINCGARS channels.
**Select “Rcu” to fill an RCU, C-11561, with COMSEC keys.
Procedure is the same as that shown for “iCom.”
***Throughout this manual, when [¯] appears in the lower right comer
of a screen, you must press the down arrow to proceed.
****Load time as part of ICOM Fill during net openings and Hot Start
Late Net Entry only, not net updates.
*****RT settings for RT-1523E are set via MENU.
12
