TM  11-5820-890-30-4 4-43. REPLACEMENT OF WIRING. Continued ITEM ACTION REMARKS REMOVAL  Continued e.  Cable  assembly  W3  wire  lists  Continued Miscellaneous  wiring.  Continued INSTALLATION f.   Wires FROM E10 E10 E10 E11 E11 E11 E18 E18 E11 (Shield) A1-E1 (Shield) A1-E2 (Shield) A1-E5 (Shield) A1-E6 (Shield) A3-E1 (Shield) A3-E2 (Shield) A3-E5 (Shield) A3-E6 (Shield) CR1-cathode CR1-cathode CR1-cathode DS1-1 DS1-2 Q1-base Q1-collector R1-1 R1-2 g. Power   supply   (1) TO COLOR/TRACER E4 DS1-1 K1-X2 P3-9 P3-14 R1-2 DS1-2 TB1-3 P3-9 A1-E13 A1-E13 A1-E14 A1-E14 A1-E19 A1-E19 A1-E19 A1-E19 CB1-1 K1-A1 TB2-2 E10 E18 P3-6 P3-10 Q1-emitter E11 Red Black Black Black Black Black Orange Black Black Black Black Black Black Black Black Black Black Red Red Red Black Orange Green Blue Yellow Black Using  soldering  kit,  solder  tagged  wires to  correct  terminals  or  connector  pins. Remove wire tags. Hold  power  supply  (1)  in  place  and  tighten 17  captive  screws  securing  it  to  mounting adapter  chassis.  Using  torque  screwdriver, torque  screws  to  8  to  10  in-lb. Before  and  after  soldering, clean  wires  and  terminals with  alcohol  and  cotton swabs. See  figure  4-4.  This  was removed  in  step  c. 4-149