TB 11-5830-263-20-14
a. MCS and Loudspeaker Cabling Installation (Fig. 4-5) continued
12. Connect the other end of the Loudspeaker Cable Assembly (5) or (6) to the
Loudspeaker (9) connector.
13. Place the Loudspeaker (9), where appropriate, inside or outside the vehicle.
14. When recovering the Loudspeaker (9), disconnect the Loudspeaker Cable
Assembly (5) or (6) from the MCS (10) and Loudspeaker (9), and properly stow
the disconnected items within the vehicle.
15. Loosely secure cable routing using tiedown straps (7) and loop clamps (8)
supplied with kit. Locate tiedown straps approximately as shown in Figure 4-5.
b . Commander's and Driver's FFCS Cabling Installation (Fig. 4-6)
1 . Secure connector P2 of the Highway Cable Assembly (2) to the right side
Station connector of the Commander's FFCS (7).
2 . Route the Highway Cable Assembly (2) along the bulkhead wall as shown in
3. Secure connector P1 of the Highway Cable Assembly (2) to the left side
Station connector of the Driver's FFCS (6).
4. Secure connector P1 of the Highway Cable Assembly (3) to the left side
Station connector of the Commander's FFCS (7).
5 . Route the Highway Cable Assembly (3) along the bulkhead wall as shown in
6 . Secure connector P2 of the Highway Cable Assembly (1) to the right side
Station connector of the Driver's FFCS (7).
7 . Route the Highway Cable Assembly (1) along the bulkhead wall as shown in
8 . Loosely secure cable routing using tiedown strap (4) and loop clamps (5)
supplied with kit. Locate tiedown strap approximately as shown in Figure 4-6.