TB 11-5830-263-20-11
4.7
VIS CABLING INSTALLATION (continued)
a. MCS and Commander's FFCS Cabling Installation (Fig. 4-5)(continued)
16. Secure connector P2 of the Highway Cable Assembly (2) to the left Station
connector on the Commander's FFCS (7).
17. Route the Highway Cable Assembly (2) along the ceiling/bulkhead wall, as
shown in Figure 4-5, until the Driver's FFCS (Figure 4-6) is reached.
18. Loosely secure cable routing using tiedown strap (5). Locate tiedown
straps approximately as shown in Figure 4-5.
b . Driver's FFCS Cabling Installation (Fig. 4-6)
1.
Secure connector P2 of the Highway Cable Assembly (1), from the MCS, to
the left side Station connector of the Driver's FFCS (2).
2.
Secure connector P1 of the Highway Cable Assembly (1), from the
Commander's FFCS, to the right side Station connector of the Driver's
FFCS (2).
3.
Loosely secure cable routing using tiedown straps (3). Locate tiedown
straps approximately as shown in Figure 4-6.
