TM 11-5820-890-10-3
RECEIVER-TRANSMITTER Continued
CHAN (channel) switch. Selects manual, preset, and cue frequencies.
NOTE
For a complete view of RT front panel,
see page 2-2.
•
CUE.
When loaded with the correct CUE frequency, may be used to contact an FH radio net
when you are not an active member of that net. CUE may be used if you are operating in
SC and wish to contact an FH net. Only unit-designated stations should load CUE
frequency.
•
MAN (manual).
When loaded with an SC frequency, can be used to communicate in SC and/or to perform
cold start net opening.
•
1-6.
Used for SC frequencies and/or FH data. One SC frequency and one FH data can be
loaded into each position; MODE setting determines if SC or FH data is used.
RF switch. Adjusts power level as listed below.
RF Switch
NOTE
For a complete view of RT front panel,
see page 2-2.
Needed transmit
Set RF switch to the
distance (LOS):
following position:
NOTE
For planning ranges see Chapter 1.
2-4
