TM 11-5820-890-30-4
2-45. REPLACEMENT OF RT
Tools:
Flat tip screwdriver
Round nose pliers
References:
CHASSIS (1A17).
Torque screwdriver
Module extractor
Paragraph 2-34 for removal and installation of RT covers.
Paragraph 2-44 for removal and installation of RF cables.
Paragraphs 2-33 through 2-43 for removal and installation of all RT modules.
Paragraph 2-47 for removal and installation of front panel assembly.
Figure 2-13 for module locations.
Figure 2-15 for location of RF cables.
ITEM
ACTION
REMARKS
REMOVAL
a.
RT top cover
Remove.
b. RT bottom cover
Remove.
c.
Front panel assembly
Remove.
d.
Modules
Remove each module one at a
time. Install each module in
proper place in replacement RT
chassis.
INSTALLATION
e.
Modules
Check bad RT chassis to make
sure all 16 modules and front
panel assembly are removed.
Check replacement RT chassis
to make sure all 16 modules
are properly installed.
f.
Front panel assembly
Install.
g.
RF cables
Attach all RF cables to proper
connectors.
h. RT bottom cover
Install.
i. RT top cover
Install.
Refer to
removal
Refer to
removal
Refer to
paragraph 2-34 for
of top cover.
paragraph 2-34 for
of bottom cover.
paragraph 2-47 for re-
moval of front panel assembly.
Refer to paragraphs 2-35 through
2-43 for removal of all RT
modules.
Refer to paragraphs 2-35 through
2-43 for installation of all RT
modules.
Refer to paragraph 2-47 for
installation of front panel
assembly.
See figure 2-15 for location of
RF cables.
Refer to paragraph 2-34 for
installation of bottom cover.
Refer to paragraph 2-34 for
installation of top cover.
2-217
