TM 11-5820-890-30-4
2-42. REPLACEMENT OF SYNTHESIZER (1A10).
Tools:
Flat tip screwdriver
Torque screwdriver
References:
Paragraph 2-33 for use of module extractor.
Paragraph 2-34 for removal and installation of RT covers.
Figure 2-13 for module location.
Figure 2-15 for location of RF cables.
Module extractor
ITEM
ACTION
REMARKS
REMOVAL
a.
RT bottom cover
b. RF cables (1W3 and 1W5)
c.
RT top cover
d. Synthesizer
INSTALLATION
e.
Synthesizer
f.
RF cables (1W3 and 1W5)
g. RT bottom cover
h. RT top cover
Remove.
Disconnect from synthesizer.
Remove.
Remove.
Check connector location and
place in card guides. Press down
to fully seat.
Connect to synthesizer.
Install.
Install.
Refer to paragraph 2-34 for
removal of bottom cover.
See figure 2-15 for location of RF
cables.
Refer to paragraph 2-34 for
removal of top cover.
Refer to paragraph 2-33 for use
of module extractor.
See figure 2-15 for location of RF
cables.
Refer to paragraph 2-34 for
installation of bottom cover.
Refer to paragraph 2-34 for
installation of top cover.
2-214
