TM 11-5820-890-30-4
2-44. REPLACEMENT OF RF CABLES 1W1 THROUGH
Tools:
Flat tip screwdriver
Torque screwdriver
Round nose pliers
1W5.
Diagonal cutting pliers
References:
Paragraph 2-34 for removal and installation of RT bottom cover.
Figure 2-15 for location of RF cables.
ITEM
ACTION
REMARKS
REMOVAL
a.
RT bottom cover
b. Cable ties
c.
RF cable
INSTALLATION
d. RF cable
e.
RF cable
f. RT bottom cover
Remove.
Cut and remove any cable ties
securing the RF cable.
Locate proper cable and pull to
disconnect at each end.
Push each end of replacement
cable onto its connector.
Secure with replacement cable
tie. Use diagonal cutting pliers.
Trim excess off cable tie.
Install.
Refer to paragraph 2-34 for
removal of bottom cover.
See figure 2-15 for location of
RF cables.
See figure 2-15 for location of
RF cables.
Refer to paragraph 2-34 for
installation of bottom cover.
2-216
