TM 11-5820-890-30-4
2-49. REPLACEMENT OF SWITCH FLEX (1A17A1W2). Continued
ITEM
ACTION
REMARKS
INSTALLATION
n.
RXMT connector
Apply silicone compound to
o-ring.
Position on front panel. Insert
switches and connector through
holes in front panel.
o.
Switch flex
p. DIM control
Use torque wrench and 5/16-inch
socket. Install Iockwasher and hex
nut. Torque nut to 11 to 13 in-lb.
q. RF PWR switch
Use torque wrench and 3/8-inch
socket. Install Iockwasher and hex
nut. Torque nut to 11 to 13 in-lb.
r. CHAN switch
Use torque wrench and 3/8-inch
socket. Install lockwasher and hex
nut. Torque nut to 11 to 13 in-lb.
s. FCTN switch
Use torque wrench and 9/16-inch
socket. Install Iockwasher and hex
nut. Torque nut to 29 to 31 in-lb.
t. MODE switch
Use torque wrench and 3/8-inch
socket. Install Iockwasher and hex
nut. Torque nut to 11 to 13 in-lb.
u. RXMT connector
Use torque wrench and 3/4-inch
spanner socket. Install spanner
nut and Iockwasher. Torque nut
to 87 to 93 in-lb.
v.
CHAN switch
Use 1/16-inch socket head
wrench. Install knob.
w.
MODE switch
Use 1/16-inch socket head
wrench. Install knob.
x.
RF PWR switch
Use 1/16-inch socket head
wrench. Install knob.
y.
FCTN switch
Use 1/16-inch socket head
wrench. Install knob.
z.
DIM control
Use 1/16-inch socket head
wrench. Install knob.
aa. Front panel assembly
Install.
Refer to paragraph 2-47 for
installation of front panel
assembly.
2-229
