TM 11-5820-890-30-4
2-47. REPLACEMENT OF FRONT PANEL ASSEMBLY. Continued
ITEM
ACTION
REMARKS
INSTALLATION Continued
w. RT top cover
x.
Left bow handle
y.
Right guard
z.
Three dust covers
aa. HUB
ab. HUB cover
Install
Refer to paragraph 2-34 for
installation of top cover.
Use cross tip screwdriver. Install
These were removed in step i.
four retained screws securing left
bow handle to RT.
Use cross tip screwdriver. Install
These were removed in step j.
four retained screws securing
right guard to RT.
Install on RXMT, AUD/FILL, and
AUD/DATA connectors.
Install.
Use flat tip screwdriver. Install.
2-48. REPLACEMENT OF AUDIO FLEX (1A17A1W3).
Tools:
Cross tip screwdriver
Flat tip screwdriver
Torque screwdriver
Module extractor
Torque wrench
Socket wrench
Soldering kit
1/16-inch socket head wrench
1/2-inch socket
Round nose pliers
3/4-inch spanner socket
3/8-inch socket
References:
Paragraph 2-47 for removal and installation of front panel assembly.
Figures 2-17 and 2-18 for location of components of front panel assembly.
ITEM
ACTION
REMARKS
REMOVAL
a.
Front panel assembly
b. VOL control
c.
COMSEC switch
Remove.
Refer to paragraph 2-47 for
removal of front panel assembly.
Use 1/16-inch socket head
wrench. Loosen set screw
securing knob. Remove knob.
Use 1/16-inch socket head
wrench. Loosen set screw
securing knob. Remove knob.
2-225
