TM 11-5820-890-30-4
12-40. REPLACEMENT
Refer to paragraphs 3-24
OF THREADED SCREW INSERTS.
and 3-25 for specific replacement procedure of threaded screw inserts.
General
Packing
Section V. PREPARATION FOR STORAGE OR SHIPMENT
Subject
Para
Page
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-41
12-170
Static Sensitive Modules . . . . . . . . . . . . . . . . . . . . 12-42
12-170
12-41. GENERAL INFORMATION.
a.
Pack the RCU and modules in approved shipping containers.
b. All modules must be shipped enclosed in material that provides protection from static electricity. See
the following paragraph.
12-42. PACKING STATIC SENSITIVE MODULES.
The following steps should be followed when packing a static sensitive module for storage or shipment.
CAUTION
To avoid damaging static sensitive modules, use an antistatic pad on the work surface and wear
a grounded wrist strap when handling the module.
ITEM
ACTION
REMARKS
a. Module (1)
Place inside antistatic bag (2)
or inside antistatic wrapping
material (3). See figure 12-17.
b. Antistatic package (4)
Seal with adhesive tape. Attach
“sensitive electronic devices” unit
pack label (5).
c. Antistatic package (4)
Place inside approved shipping
container (6). Attach “sensitive
electronic devices” intermediate
pack label (7).
12-170
