TM 11-5820-890-30-4
12-36. REPLACEMENT OF SWITCH FLEX. Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
l. MODE switch
Use 3/8-inch socket and socket wrench.
Remove hex nut and Iockwasher.
Use 3/8-inch socket and socket wrench.
Remove hex nut and Iockwasher.
m. SPKR switch
Use 3/4-inch spanner socket and socket
wrench. Remove spanner nut and lock-
washer.
n. SPKR connector
o. Switch flex
Remove from front panel assembly.
INSTALLATION
p. SPKR connector
q. Switch flex
Apply silicone compound to o-ring.
Position on front panel, Insert switches,
control, and connector through holes in
front panel.
r .
Use torque wrench and 5/16-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
Use torque wrench and 3/8-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
s.
Use torque wrench and 3/8-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
t.
Use torque wrench and 9/16-inch socket.
Install Iockwasher and hex nut. Torque
nut to 29 to 31 in-lb.
u.
Use torque wrench and 3/8-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
v.
Use torque wrench and 3/8-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
w.
Use torque wrench and 3/4-inch spanner
socket. Install spanner nut and lock-
washer. Torque nut to 88 to 92 in-lb.
w.
12-165
