TM 11-5820-890-30-4
12-38. REPLACEMENT OF FRONT PANEL. Continued
ITEM
ACTION
REMARKS
REMOVAL
a. Front panel assembly
Remove.
Refer to paragraph 12-34
for removal of front panel
assembly.
b. HUB cover
Use flat tip screwdriver. Loosen two
captive screws securing HUB cover to
front panel. Remove and retain HUB
cover.
c. Audio flex
Remove.
d. Switch flex
Remove.
e. Display CCA and insulator
Remove.
plate
f. Keypad
Remove.
g. Six standoff posts
Use flat tip screwdriver. Remove and re-
tain six standoff posts.
h. Window frame
Use cross tip screwdriver. Remove and
retain six screws securing window frame
to front panel. Remove window frame.
i.
Shielding gasket
Remove and discard.
j.
Observation window
Remove and retain.
k. Window gasket
Remove and discard.
l. Identification plate and two
Use cross tip screwdriver. Remove and
screws
retain.
m. Front panel
Discard.
Refer to paragraph 12-35
for removal of audio flex.
Refer to paragraph 12-36
for removal of switch flex.
Refer to paragraph 12-37
for removal of display
CCA.
Refer to paragraph 12-33
for removal of data entry
keypad.
lNSTALLATION
n. Identification plate and
Position retained identification plate on
This was removed in step
front panel
replacement front panel.
l.
12-168
