13-18. REPLACEMENT Tools: OF POWER SUPPLY ADAPTER CHASSIS (8A2)

Figure 13-2. Power Supply Adapter (Front and Bottom Views)

TM-11-5820-890-30-4 Ground ICOM Radio Sets: Receiver-Transmitter Radio RT-1523(C)/U (NSN 5895-01-234-8093) Manual
Page Navigation
924

TM 11-5820-890-30-4 13-18. REPLACEMENT Tools: OF POWER SUPPLY ADAPTER CHASSIS (8A2). Flat tip screwdriver Torque screwdriver References: Paragraph 13-17 for removal and installation of the heat sink assembly (8A1). ITEM ACTION REMARKS REMOVAL a. Heat sink assembly (2) Use flat tip screwdriver. Remove and b. Power supply chassis (1) INSTALLATION c. Power supply chassis (1) retain heat sink assembly (2) from defective power supply adapter chassis (1). See figure 13-3. adapter Turn in defective chassis to supply for disposition. adapter Obtain replacement power supply adapter chassis. Refer to paragraph 13-17 for heat sink removal. d. Heat sink Use flat tip screwdriver. Install retained Refer to paragraph 13-17 assembly (2) heat sink assembly (2) on replacement for heat sink installation. power supply adapter chassis (1). Use torque screwdriver. Torque screws to 8 to 10 in-lb. Figure 13-3. Power Supply Adapter (Left Side View) With Heat Sink Assembly. 13-30

Privacy Statement
Press Release
Contact