TM 11-5830-263-10
b. Set PROGRAM switch to FUNCTION. Depress CHANGE button until
display shows 2 A r t .
c. Turn PROGRAM switch to the STORE position momentarily and release.
2 A r t is stored to program memory.
3. Programming 3Art and 3Brt to memory.
a. Set PROGRAM switch to STATION. Display shows 2 A r t .
Depress CHANGE button until 2 changes to 3. Display will show 3 A * * .
b. Set PROGRAM switch to FUNCTION. Depress CHANGE button until
display shows 3 A r t .
c. Turn PROGRAM switch to the STORE position momentarily and release.
3 A r t is stored to program memory.
d. Set PROGRAM switch to RADIO. Display shows 3 A r t . Depress
CHANGE button until A changes to B. Display will show 3 B * * .
e. Set PROGRAM switch to FUNCTION. Depress CHANGE button until
display shows 3 B r t .
f. Turn PROGRAM switch to the STORE position momentarily and release.
3 B r t is stored to program memory.
4. Programming 4Art and 4Crt to memory.
NOTE
Programming radio access levels to crewstations
need not be done in any particular order. 4Crt is
stored to program memory before 4Art in the
steps below.
a. Set PROGRAM switch to STATION. Display shows 3 B r t .
Depress CHANGE button until 3 changes to 4. Display will show 4 B * * .
b. Set PROGRAM switch to RADIO. Depress CHANGE button until B
changes to C. Display will show 4 C * * .
c. Set PROGRAM switch to FUNCTION. Depress CHANGE button until
display shows 4 C r t .
d. Turn PROGRAM switch to the STORE position momentarily and release.
4 C r t is stored to program memory.
2 - 26
