TM 11-5830-263-10
2.14.
CHANGING SYSTEM CONFIGURATION.
2.14.1. Installation of Remote FFCS
a. Disconnect Shorting Plug from external vehicle connector.
(See Figure 2-20)
b. Connect P3 of branched cable to external vehicle connector.
c. Connect P2 of branched cable to right side STATION connector
of remote FFCS.
d. Connect P1 of branched cable to left side STATION connector
of remote FFCS.
2.14.2. Removal of Remote FFCS
a. Remove P3 of branched cable from vehicle external connector.
b. Connect shorting plug to vehicle external connector.
c. Based on unit policy, either store FFCS attached to branched
cable or remove cable from FFCS and store each separately. Insure that
stored items are properly located and secure so they do not interfere with
operations and are not subject to accidental damage.
2 - 32
