TB 11-5830-263-20-14
MASTER CONTROL STATION (MCS) INSTALLATION
a. Install and secure the MCS to the existing bracket in the sequence(s)
shown in Figure 4-3 using the parts listed in Table 4-1 and the following
tools:
7/16 Inch Socket Wrench
7/16 Inch Box or Open End Wrench
b. Place the M88 decal (Item 6), on the curbside cab wall below and to the
left of the MCS where it is clearly visible.
Item
Description
Qty
Part Number
NSN
No.
1
MCS
1
A3205747
5895-01-382-3221
2
Screw, Cap, Hex Head (1/4-20UNC-2A)
4
MS90725-8
3
Washer, Flat
4
MS51412-4A
4
Washer, Lock, Internal and External Tooth
4
MS45904-68
5
Nut, Plain, Hex (1/4-20UNC-2B)
4
MS51967-2
6
Decal, M88A2
1*
A3207041
* See note 4.2b above and Figure 4-5.
