TM 11-5820-890-30-4
14-18. VISUAL INSPECTION OF BATTERY TRAY ASSEMBLY.
Before beginning any maintenance procedure, inspect the battery tray assembly for physical damage. Use the
following table as a guide to inspect the assembly. Look for damaged or missing parts, and replace them as
required. The external parts are shown in figure 14-3.
ITEM
ACTION
REMARKS
a.
b.
c.
d.
e.
f.
g.
h.
Battery tray chassis (1)
Mounting plate (2) and
attaching hardware
J1 connector (3) and
attaching hardware
P1 connector (4) and
attaching hardware
S1 pushbutton switch (5)
and attaching hardware
Seal screw (6)
DS1 lamp holder (7) and
attaching hardware
Battery box gasket (8)
Check for damage and tight connection
to mounting plate.
Check for damage.
Check for bent/broken pins and tight
connection to battery tray chassis.
Check for bent/broken pins and tight
connection to battery tray chassis.
Check for
to battery
Check for
chassis.
Check for
to battery
Check for
seating.
damage and tight connection
tray chassis.
a tight seal to battery tray
damage and tight connection
tray chassis.
cuts, tears, and improper
If defective, proceed to
paragraph 14-31.
If defective, proceed to
paragraph 14-19.
If defective, proceed to
paragraph 14-24.
If defective, proceed to
paragraph 14-21.
If defective, proceed to
paragraph 14-30.
If defective, proceed to
paragraph 14-29.
If defective, proceed to
paragraph 14-28.
If defective, proceed to
paragraph 14-32.
Figure 14-3. Battery Tray Assembly With Mounting Plate.
14-19
