TM 11-5820-890-30-4
14-19. REPLACEMENT OF MOUNTING PLATE. Continued
Figure 14-4. Battery Tray Subassembly With Mounting Plate.
14-20. REPLACEMENT OF BATTERY TRAY CIRCUIT CARD ASSEMBLY (12A1A1).
Tools:
Cross tip screwdriver
Soldering kit
Long nose pliers
Expendable Supplies:
Solder
Alcohol
Cotton swabs
References:
Paragraph 14-19 for removal and installation of mounting plate.
Paragraph 14-33 for removal and installation of threaded screw inserts.
ITEM
ACTION
REMARKS
REMOVAL
a. Mounting plate
Remove and retain.
Refer to paragraph 14-19
for removal of mounting
plate.
b. A1 battery tray CCA
Tag the location of each wire soldered
wires (2)
to 17 E-terminals on A1 battery tray
CCA. See figure 14-6.
c. 17 E-terminals
Use long nose pliers and soldering equip-
ment. Desolder and remove 20 tagged
wires from 17 E-terminals.
14-21