TM 11-5820-890-30-4
2-40. REPLACEMENT OF lF/DEMODULATOR (1A8).
Tools:
Flat tip screwdriver
Torque screwdriver
Round nose pliers
References:
Paragraph 2-33 for use of module extractor.
Paragraph 2-34 for removal and installation of RT covers.
Figure 2-13 for module location.
Figure 2-15 for location of RF cables.
Module extractor
ITEM
ACTION
REMARKS
REMOVAL
a. RT bottom cover
b. RF cable (1W4)
c.
RT top cover
d. lF/demodulator
INSTALLATION
e.
lF/demodulator
f.
RF cable (1W4)
g. RT bottom cover
h. RT top cover
Remove.
Disconnect from lF/demodulator.
Remove.
Remove.
Check connector location and
place in card guides. Press down
to fully seat.
Connect to lF/demodulator.
Install.
Install.
Refer to paragraph 2-34 for
removal of bottom cover.
See figure 2-15 for location of RF
cable 1W4.
Refer to paragraph 2-34 for
removal of top cover.
Refer to paragraph 2-33 for use
of module extractor.
See figure 2-15 for location of RF
cable 1W4.
Refer to paragraph 2-34 for
installation of bottom cover.
Refer to paragraph 2-34 for
installation of top cover.
2-211
