12-29. REPLACEMENT OF MODULES 19A2,
19A9, 19A10, AND 19A11. Continued
TM 11-5820-890-30-4
19A3, 19A4, 19A5, 19A6, 19A7, 19A8,
References:
Paragraph 12-27 for use of module extractor.
Paragraph 12-28 for removal and installation of RCU top cover.
Figure 12-12 for module locations.
ITEM
ACTION
REMARKS
REMOVAL
a. RCU top cover
Remove.
Refer to paragraph 12-28
for removal of top cover.
b. Module
Hook module extractor to module.
Refer to paragraph 12-27
for use of module
extractor.
Pull free of RCU.
See figure 12-12 for
module locations.
c. Module
INSTALLATION
d. Module
Check connector location and place
module in card guide. Press down to
fully seat module.
e. RCU top cover
Install.
Refer to paragraph 12-28
for installation of top cover.
12-30.
Tools:
REPLACEMENT OF POWER SUPPLY (19A1).
Flat tip screwdriver
Torque screwdriver
Module extractor
Cross tip screwdriver
References:
Paragraph 12-27 for use of module extractor.
Paragraph 12-28 for removal and installation of RCU covers.
Figure 12-12 for module locations.
Figure 12-13 for screw locations.
ITEM
ACTION
REMARKS
REMOVAL
a. RCU bottom cover
Remove.
Refer to paragraph 12-28
for removal of bottom
cover.
12-151
