TM 11-5820-890-30-4
12-31. REPLACEMENT OF DC POWER FlLTER (19A12). Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
b. Two screws
c. RCU top cover
d. DC power filter
INSTALLATION
e. DC power filter
f. Two screws
g. RCU bottom
cover
h. RCU top cover
Using cross tip screwdriver, remove and
See figure 12-13 for screw
retain two screws securing DC power
locations.
filter.
Remove.
Remove.
Check connector
Refer to paragraph 12-28
for removal of top cover.
location, and insert DC
power filter. Press down to fully seat.
Using torque screwdriver, torque two re-
Screws were removed in
tained screws to 8 to 10 in-lb.
step b.
Install.
Refer to paragraph 12-28
for installation of bottom
cover.
Install.
Refer to paragraph 12-28
for installation of top cover.
12-32. REPLACEMENT OF FRONT PANEL/CHASSIS (19A13).
Tools:
Flat tip screwdriver
Torque screwdriver
Cross tip screwdriver
References:
Module extractor
Paragraph 12-28 for removal and installation of RCU covers.
Paragraphs 12-29 through 12-31 for removal and installation of all RCU modules.
ITEM
ACTION
REMARKS
REMOVAL
a. RCU top cover
Remove.
Refer to paragraph 12-28
for removal of top cover.
b. RCU bottom cover
Remove.
Refer to paragraph 12-28
for removal of bottom
cover.
12-154
