12-32. REPLACEMENT
TM 11-5820-890-30-4
OF FRONT PANEL/CHASSIS (19A13). Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
c. Modules
Remove each module one at a time.
Refer to paragraphs 12-29
through 12-31 for removal
of all RCU modules.
INSTALLATION
d. Modules
e. RCU bottom
cover
Install each module in proper place
in replacement front panel/chassis.
Install.
f.
top
cover
Install.
12-33. REPLACEMENT OF DATA ENTRY KEYPAD.
Tools:
Needle nose pliers
Cross tip screwdriver
Expendable supplies:
Silicone compound
References:
Figure 12-14 for screw locations.
Refer to paragraphs 12-29
through 12-31 for installa-
tion of all RCU modules.
Refer to paragraph 12-28
for installation of bottom
cover.
Refer to paragraph 12-28
for installation of top cover.
ITEM
ACTION
REMARKS
REMOVAL
a. RCU (1)
Place on work surface with front panel
See figure 12-14.
(2) toward you.
b. Four screws (5) and flat
Using cross tip screwdriver, remove and
See figure 12-14 for screw
washers (6)
retain four screws and flat washers hold-
Iocations.
ing keypad (4) to front panel (2).
12-155
