TM 11-5820-890-30-4
12-30. REPLACEMENT OF POWER SUPPLY (19A1). Continued
ITEM
ACTION
REMARKS
REMOVAL Continued
b. Two screws
Using
retain
cross tip screwdriver, remove and
two screws securing power supply.
c. RCU top cover
Remove.
d. Power supply
Remove.
INSTALLATION
e. Power supply
f. Two screws
g. RCU bottom
cover
h. RCU top cover
Check connector location and insert
power supply. Press down to fully seat.
Using torque screwdriver, torque two
retained screws to 8 to 10 in-lb.
Install.
Install.
See figure 12-13 for screw
locations.
Refer to paragraph 12-28
for removal of top cover.
Refer to paragraph 12-27
for use of module
extractor.
Screws were removed In
step b.
Refer to paragraph 12-28
for installation of bottom
cover.
Refer to paragraph 12-28
for installation of top cover.
12-31. REPLACEMENT OF DC POWER FILTER (19A12).
Tools:
Flat tip screwdriver
Torque screwdriver
Cross tip screwdriver
References:
Paragraph 12-28 for removal and installation of RCU covers.
Figure 12-12 for module Iocations.
Figure 12-13 for screw locations.
ITEM
ACTION
REMARKS
REMOVAL
a. RCU bottom cover
Remove.
Refer to paragraph 12-28
for removal of bottom
cover.
12-153
