TM 11-5820-890-30-4
12-35. REPLACEMENT OF AUDIO FLEX. Continued
ITEM
ACTION
REMARKS
INSTALLATION
k. Audio flex
l. VOL control
m. COMSEC switch
n. AUD/FILL connec-
tor
o. AUD/DATA con-
nector
p. Audio flex, two screws,
and flat washers
q. Audio flex
r. VOL control
s. COMSEC switch
t. Front panel
assembly
Position audio flex on front panel. Insert
connectors and controls through holes in
front panel.
Use torque wrench and 1/2-inch socket.
Install Iockwasher and hex nut. Torque
nut to 19 to 21 in-lb.
Use torque wrench and 3/8-inch socket.
Install Iockwasher and hex nut. Torque
nut to 11 to 13 in-lb.
Use torque wrench and 3/4-inch socket.
Install spanner nut and Iockwasher.
Torque nut to 88 to 92 in-lb.
Use torque wrench and 3/4-inch socket.
Install spanner nut and Iockwasher.
Torque nut to 88 to 92 in-lb.
Use cross tip screwdriver. Install two re-
tained screws and flat washers securing
audio flex to HUB cavity.
Use soldering equipment. Solder two flex
connections to HUB cavity.
Use 1/16-inch socket head wrench.
Install knob.
Use 1/16-inch socket head wrench.
Install knob.
Install.
Refer to paragraph 12-34
for installation of front
panel assembly.
12-163
