TM 11-5820-890-30-4
13-39. REPLACEMENT OF REAR ACCESS COVER ASSEMBLY. Continued
ITEM
ACTION
REMARKS
INSTALLATION
s.
t.
u.
v.
w.
x.
y.
z.
Roar access cover (2)
and five Iockwashers
Connector (6) o-ring
hex nut, and
Iockwasher
Connector (3) o-ring
hex nut, and
Iockwasher
Connector (10) o-ring
Connector (10)
hex nut, and
Iockwasher
Connector (13) and
connector retaining
plate (14)
aa.
Obtain replacement rear access cover
and Iockwashers.
Apply silicone compound to o-ring on
retained J5 connector.
Use 1 1/16-inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J5
connector (6) to the rear access cover.
Use torque wrench and 1 1/16-inch
socket. Torque nut to 70 in-lb.
Apply silicone compound to o-ring on
retained J3 connector.
Use 7/8-inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J3
connector (3) to the rear access cover.
Use torque wrench and 7/8-inch socket.
Torque nut to 60 in-lb.
Apply silicone compound to o-ring on
retained J4 connector.
Use 7/8-inch socket wrench. Install
and hand tighten retained hex nut and
replacement Iockwasher securing the J4
connector (10) to the rear access cover.
Use torque wrench and 7/8-inch socket.
Torque nut to 60 in-lb.
Position retained connector and connector
retaining plate in rear access cover.
Apply sealing compound to threads of four
retained screws. Use fIat tip screwdriver.
Install and hand tighten four screws securing
the connector and connector retaining plate
to the rear access cover. Use torque screw-
driver. Torque screws to 90 in-lb.
13-62
