TM 11-5820-890-10-1
P M C S C o n t i n u e d
CABLES
Item When
Equipment not
no.
B
A
PROCEDURE
ready/available
if: (See Maint)
10 l
a. Inspect cables with BNC connectors. Insure
Connector pin
connector pin is not bent, pushed in or
is pushed in or
broken: ground contacts are not bent or
broken; ground
broken; connector head is not bent.
contacts
are
bent or broken;
connector
head is bent.
b. Insure complete connector head does not
Connector
turn on cable.
head turns on
cable.
c. Inspect cables with 6 pin connectors. Insure
Dirty, bent or
that no dirt is inside of connector, pins are
corroded pins.
clean, corrosion-free and not bent. Verify
that spacers have been installed.
d. Insure 0 ring is present and serviceable.
O ring is miss-
ing or not ser-
viceable.
e. Insure that connector head does not turn on
Connector
cable.
head turns on
cable.
5-8
