2-38. REPLACEMENT
Tools:
TM 11-5820-890-30-4
OF ECCM MODULE (1A5).
Flat tip screwdriver
Torque screwdriver
References:
Paragraph 2-33 for use of module extractor.
Paragraph 2-34 for removal and installation of RT top cover.
Figure 2-13 for module locations.
Module extractor
ITEM
ACTION
REMARKS
REMOVAL
a.
RT top cover
Remove.
b. ECCM module
Remove.
c.
Control module
Press down to reseat.
INSTALLATION
d. ECCM module
Check connector location and
place in card guide. Press down
until ECCM module connector
touches control module connec-
tor. Carefully aline ECCM module
with control module. Press down
to fully seat.
Install.
e. RT top cover
Refer to paragraph 2-34 for
removal of top cover.
Refer to paragraph 2-33 for use
of module extractor.
CAUTION
Carefully aline ECCM module
with control module to avoid
connector damage.
Refer to paragraph 2-34 for
installation of top cover.
2-209